Sensors for 2020 Ram ProMaster 2500
Heater hose to heater tube. Right Rear Brake Tube to Unibody. Front Wheel Speed Sensor Cable.
Screw And Washer
M6x1.00x16.00. M6x16. Up To 11/04/2012. Front. Speed Sensor To Knuckle. Rear. Wheel Speed Sensor To Spindle.
Screw
M6x1x25. Handle Pull Cup To Door. Inside Release Handle. Visor Center Support. Visor To Roof. Door Panel Attach. CAD Elbow to Turbo. Goes With #1. Pull Cup & Inside Handle.
4593949ab. AKA Fuel Tank Presure Sensor. Also Known As Fuel Tank Pressure Sensor.
Air Cleaner To Throttle Body. Located in air cleaner resonartor. Air Temperature Intake Twist Lock.
Engine Oil. Engine Coolant Temerature. In water pump. Coolant temperature. Engine coolant temp.
In Cylinder Head. Oil. At Cylinder Head. Coolant Temp in Head. Coolant Temperature Sensor. At Block. Fluid Temp Sensor to Cylinder Head.
Switch. Refer To Illustration 105 For Location Of Engine Edentification Plant Code.. With Engine Plant Code TPHP6. IMPORTANT Different Engine Plants Used Different Oil Filter Adapter Assemblies With Different Temperature/Pressure Sensors At The Time Of Production.Refer To Engine Identification Illustration 105 For Location Of Engine Identification Plant Code. Sending Unit To Engine Block.
M8x1.25x22.00. Hose to Pump. Detonation Sensor To Engine Block. Knock Sensor To Engine. Knock sensor to block. Pressure Line to Pump Attachment.