Cylinder Block for 2011 Ram Dakota
Cylinder Block to Clutch Housing. Block To Head. [.25x.75]. Or Transmission Housing. Cylinder Block to Transmission. 1/2 x 3/4.
Short Block Engine
New Part For Core Return. SERVICE WARNING: If The Original Engine Has Experiencd A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure - The Intake Manifold Must Be Replaced With A New Manifold. See Note.
Plug
After 6/14/04. After 4/26/04. Mega Cab. Coolant Drain [.25x18x.69]. 0.250-18x.690. Cylinder Block Water Jacket Drain. Oil Gallery, Front. Right And Left Cylinder Block Coolant Drain.
Cup Plug
Id=m32.26 od=35.00 thick=1.37. Axle Shaft Flange Plug. For Engines Without Cylinder Block Heater Only. 1.39 diameter. [id=m32.26 od=35.00 thk=1.37]. Front Crankcase Cavity Block Off. Water Jacket. For Vehicles Without Cylinder Block Heater Only.
Cup Plug
Id=m32.26 od=35.00 thick=1.37. Axle Shaft flange Plug. For Engines Without Cylinder Block Heater Only. 1.39 diameter. [id=m32.26 od=35.00 thk=1.37]. Front Crankcase Cavity Block Off. Water Jacket. For Vehicles Without Cylinder Block Heater Only.
All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. Item 13 Also Contained in Short Block Engine Kit. Mega Cab. Cylinder Block To Transaxle. Block To Transmission. Cylinder Block To Head. Engine Block To Clutch Housing.
Bedplate To Cylinder Block. M11x1.50x8x1.25x142.75. Crankshaft Bearing. [m11x1.50xm8x1.25x118.50]. [m11x1.50xm8x1.25x142.75].
Bedplate To Cylinder Block. M11x1.50x8x1.25x118.50. M11x1.50xM8x1.25x118.50. Crankshaft Bearing.
M11x1.50x90.00. Main Bearing Cap To Cylinder Block. Crankshaft Bearing. M11x1.50x90.0. BedPlate to Cylinder Block.
Main Bearing Cap To Cylinder Block. Crankshaft Bearing. [M10x1.50x55.00]. BedPlate to Cylinder Block.
Bedplate To Cylinder Block. Mega Cab. Main Bearing Cap To Cylinder Block. Rocker Shaft Mounting. Rocker Shaft to Cylinder Head. Crankshaft Bearing. M8x1.25x50.00. Quad Cab. Regular Cab. Rocker Arm Shaft.
Hex Flange Head Bolt
Bedplate To Cylinder Block. M10x1.50x83.50. Crankshaft Bearing. Main Bearing Cap To Cylinder Block. [m10x1.50x83.5].