Cylinder Block for 2008 Chrysler Aspen
Long Block Engine
SERVICE WARNING: If The Original Engine Has Experiencd A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure - The Intake Manifold Must Be Replaced With A New Manifold.
Long Block Engine
New Part For Core Return. SERVICE WARNING: If The Original Engine Has Experiencd A Catastrophic Failure - Including Piston, Cylinder Bore, Valve, or Valve Seat Failure - The Intake Manifold Must Be Replaced With A New Manifold. See Note.
Plug
After 6/14/04. After 4/26/04. Mega Cab. Coolant Drain [.25x18x.69]. 0.250-18x.690. Cylinder Block Water Jacket Drain. Oil Gallery, Front. Right And Left Cylinder Block Coolant Drain.
Plug
Oil Gallery. Engine Block Oil Hole. 500-14x.560. Block To Bedplate.
Cup Plug
Id=m32.26 od=35.00 thick=1.37. Axle Shaft Flange Plug. For Engines Without Cylinder Block Heater Only. 1.39 diameter. [id=m32.26 od=35.00 thk=1.37]. Front Crankcase Cavity Block Off. Water Jacket. For Vehicles Without Cylinder Block Heater Only.
Dowel Pin
All Plugs And Dowel Pins Must Be Installed On Cylinder Block Before Installing Engine. Item 13 Also Contained in Short Block Engine Kit. Mega Cab. Cylinder Block To Transaxle. Block To Transmission. Cylinder Block To Head. Engine Block To Clutch Housing.
Cylinder Block to Clutch Housing. Block To Head. [.25x.75]. Or Transmission Housing. Cylinder Block to Transmission. 1/2 x 3/4.
Double Ended Stud
Bedplate To Cylinder Block. M11x1.50x8x1.25x142.75. Crankshaft Bearing. [m11x1.50xm8x1.25x118.50]. [m11x1.50xm8x1.25x142.75].
Double Ended Stud
Bedplate To Cylinder Block. M11x1.50x8x1.25x118.50. M11x1.50xM8x1.25x118.50. Crankshaft Bearing.
Hex Flange Head Bolt
Main Bearing Cap To Cylinder Block. M11x1.50x90.00. Crankshaft Bearing. M11x1.50x90.0. BedPlate to Cylinder Block.
Hex Flange Head Bolt
Main Bearing Cap To Cylinder Block. Crankshaft Bearing. [M10x1.50x55.00]. BedPlate to Cylinder Block.
Hex Flange Head Bolt
Bedplate To Cylinder Block. Mega Cab. Main Bearing Cap To Cylinder Block. Rocker Shaft Mounting. Rocker Shaft to Cylinder Head. Crankshaft Bearing. M8x1.25x50.00. Quad Cab. Regular Cab. Rocker Arm Shaft.
Hex Flange Head Bolt
Bedplate To Cylinder Block. Main Bearing Cap To Cylinder Block. M10x1.50x83.50. Crankshaft Bearing. [m10x1.50x83.5].
Dowel
Engine Block To Front Cover. Cylinder Block to Bedplate.